|
Product Details:
Payment & Shipping Terms:
|
| Name: | Material 1.4404 Protection Cover For Large Quipment Marine Winch Process Of Passivation | Material: | 1.4404 Stainless Steel |
|---|---|---|---|
| Surface General: | Ra3.2 | Application Range: | Offshore Winch |
| Capacity: | 1000T | Weight: | 13.65KG |
| Surface Treatment: | Passivation | Standard: | NS-ISO 2768mK |
| High Light: | Offshore Winch Spare Parts,1.4404 Winch Spare Parts,1.4404 marine Winch accessories |
||
Product name:Material 1.4404 Protection Cover For Large Quipment Marine Winch Process Of Passivation
Other name:Protection Cover
Standard:NS-ISO 2768mK
Sling type:cable or wire
power: Electirc
Surface treatment: pickling treatment
Rope: 100-1000mm
Rope diameter: 3-199mm
Tolerance General: NS-ISO 2768mK
Preparation and cutting of steel
Cutting and beveling of materials shall be carried out by thermal cutting or machining.
Thermally cut edges shall be ground to sound metal before welding.
All sharp edges, corners and Curing Zone must be rounded to R=2.5mm.
Stainless steel shall by ground, and then acid treated and cleaned before use.
Structural composition
| Q/TY | ITEM | DESCRIPTION | TECHNICAL DESCRIPTION | MATERIAL | MASS | |
| 1 | 1 | Plate | PL25 | S355J2+N | 17.23KG | |
| 2 | 2 | Plate | PL20 | S355J2+N | 319.22KG | |
| 1 | 3 | Plate | PL20 | S355J2+N | 29.83KG | |
| 2 | 4 | Plate | PL15 | S355J2+N | 87.67KG | |
| 4 | 5 | Plate | PL15 | S355J2+N | 1.21KG | |
| 1 | 6 | Plate | PL15 | S355J2H+N | 21.74KG | |
| 1 | 7 | Tube circular | Ø546×Ø506×L790 | S355J2+N | 205.22KG | |
| 1 | 8 | Bar circular | Ø16×L100 | S355J2+N | 0.13KG | |
| 1 | 9 | Bar circular | Ø120×L230 | S355J2+N | 20.16KG |
1. Top quality with competitive price.
2. Widely used in factory, mining, shipyard or double beam cranes.
3. Compact structure and reasonable design.
4. Easy to install, operate and maintenance.
5. Low noise and good working condition.
6. Safe and reliable function.
Cutting and beveling of materials shall be carried out by thermal cutting or machining.
Thermally cut edges shall be ground to sound metal before welding.
All sharp edges, corners and Curing Zone must be rounded to R=2.5mm.
Stainless steel shall by ground, and then acid treated and cleaned before use.
Finishing requirement
To ensure sufficient adhession for surface treatment all sarp edges shall be rounded to minimum R2.5, welding spatter beadsd and slag shall be completely removed ,Damage in surfaces shall be filed and grinded flush, negative thickness measurements are prohibited
Contact Person: Marie
Tel: +86 13315131859
